menu 1
menu 2
menu 3

 



 

 

Note: Please check the "Last Updated" date under the Part Number to make sure that you have the latest Data Sheet.

For Non-RoHS Packages, please contact the factory for availability.

Touch Control Light Dimmer …. (8 Pins)
LS7231, LS7231-S thru LS7233, LS7233-S
Last Update: 01/17/08
Touch or pushbutton input control
Controls resistive loads
Momentary input activation causes ON/OFF switching
Prolonged input activation causes variable dimming
Brightness Memory and Dimming Direction Reverse features
depending on Part Number
DOZE input for external control of DIM-TO-OFF time
SLAVE input for control by Remote Extension
Ideal for wall switch control of ceiling mounted lighting, foot switch control of large floor lamps and hand switch control of small table lamps.
 
Touch Control Light Dimmer …. (8 Pins)
LS7232ND, LS7232ND-S
Last Update: 11/16/07
Same features as LS7231, LS7232, or LS7333 except DOZE
input is replaced by 3-State MODE input.
MODE input selects LS7231, LS7232 or LS7233 type functionality.
LS7232ND can replace LS7232 in PCBs where DOZE input is not used.
 
Proximity / Touch Control Halogen Lamp Dimmer.... (14 Pins)
LS7232NT, LS7232NT-S
Last Update: 04/20/05
Proximity (No-Touch), touch or pushbutton input control
No-Touch control through optical sensing
Controls resistive and inductive loads
Automatic safety cutout
Soft turn-on
Mode inputs select from 7 operating modes
Operating options include Memory and Delayed-Off
Return to Top
 
Multi-Level Dimmer…. (16 Pins)
LS7315, LS7315-SW
Last Update: 01/27/03
Pushbutton input controls
Up to 10 selectable intensity (power) levels
A selected intensity level input becomes an output  
that can drive a LED to indicate the selected intensity

Applications include wall switch (AC Hot) and
plug-in (AC Hot and Neutral) dimmer configurations

 
Multi-Level Dimmer…. (14 Pins)
LS7317, LS7317-S
Last Update: 04/16/08
Pushbutton input controls
Up to 5 selectable intensity (power) levels
A selected intensity level input becomes an output  
that can drive a LED to indicate the selected intensity
Controls high-voltage lamps and electronic-transformer
coupled low-voltage lamps via a triac interface

Applications include wall switch (AC Hot) and
plug-in (AC Hot and Neutral) dimmer configurations

 
Auto Shut-Off Light Switch with Delayed Off….  (8 Pins)
LS7338, LS7338-S
Last Update: 11/17/04
Operating Sequence:  TIMED-ON  -  DELAYED-OFF  -   OFF
Manual or Automatic Sequence Advance
External RC programs On-Timer
Transition from Timed-On to Delayed-Off indicated by
reduction of light brightness
Light DIMS-TO-OFF during the Delayed-Off period
 
Auto Shut-Off Light Switch…. (8 Pins)
LS7339, LS7339-S
Last Update: 01/27/03
ON and OFF input controls
External RC programs Timer
Timer retriggers with each activation of ON input
Applications include Timed-On Wall Switch for heat lamps
Return to Top
 
Light Dimmer with Up and Down Controls…. (8 Pins)
LS7535, LS7535-S; LS7535FT, LS7535FT-S
Last Update: 06/03/03
Touch or pushbutton UP and DOWN input controls
Momentary UP/DOWN input activation cause ramping to MEMORY ON/OFF states
Prolonged UP/DOWN input activation cause variable dimming
operation towards MAX/MIN Brightness Levels
DOZE input for external control of DIM-TO-OFF time
LS7535 has "soft" Turn-On/Off; LS7535FT has instant Turn-On/Off
 
AGC Touch Control Step Dimmer…. (8 Pins)


LS7538, LS7538-S; LS7539, LS7539-S
Last Update: 01/27/03
LS7541, LS7541-S NEW!
Last Update: 03/23/07
Touch Sensitivity is independent of Touch Plate Size and Line-Plug Polarity
Pin selection of three available Brightness Step Sequences
LS7539 and LS7541 are functionally equivalent
Pushbutton control can be used instead of 'Touch'.
Applications include Wall Switch step dimmers and Touch Control step dimmers for small table lamps to large floor lamps.
 
AGC Touch Control Light Switch with Soft-Off …. (8 Pins)
LS7540, LS7540-S NEW!
Last Update: 11/06/07
Touch Sensitivity is independent of Touch Plate Size and Line-Plug Polarity
If Off, a 'Touch' produces Max Intensity (On) instantaneously
If On, a 'Touch' initiates intensity ramp-down (Soft-Off). Max intensity to Off ramp-down time is programmable by an external RC. The Soft-Off feature provides light for the User to exit the room. Ramp-down time = 0 if no RC is connected.
Application of a 'Touch' during ramp-down causes the ramp-down to stop. Once stopped, a 'Touch' causes the ramp-down to Off to resume. Stopping and starting the ramp-down can be repeated as often as desired thus giving the User full control in setting the light intensity.
Pushbutton control can be used instead of 'Touch'.
Applications include Wall Switches and Touch Control modules for small table lamps to large floor lamps
 
Touch Control Halogen Light Dimmer …. (8 Pins)
LS7631, LS7631-S; LS7632, LS7632-S
Last Update: 12/05/05
Touch or pushbutton input control

Controls high-voltage lamps and *transformer-coupled
low-voltage halogen lamps. *Magnetic transformers and
many electronic transformers.

Controls Fluorescents and CFLs via dimming ballasts
Direct replacement for P/N SLB0587
Soft-turn on
Automatic safety cutout
Mode input selects LS7231, LS7232 or LS7233 type operation
LS7631 - dimming cycles through Maximum and Minimum
LS7632 - dimming stops at Maximum and Minimum
 
Return to Top
Touch Control Halogen Light Dimmer…. (8 Pins)
LS7634, LS7634-S; LS7634FO, LS7634FO-S
LS7635, LS7635-S; LS7635FO, LS7635FO-S
Last Update: 09/06/06
LS7634 functionally similar to LS7631
LS7635 functionally similar to LS7632

Compatible with virtually all electronic transformers.

"FO" versions power up Full On.
 
Voltage Control Light Dimmer with Soft On/Off …. (8 Pins)
LS7642, LS7642-S; LS7642FO, LS7642FO-S NEW!
Last Update: 07/15/08
Touch or pushbutton input control for soft turn-on and turn-off.
Analog voltage input directly controls lamp intensity.

Interfaces easily with a uC for programmable lighting control.

Controls high-voltage lamps and *transformer-coupled low-voltage halogen lamps. *Magnetic transformers and virtually all electronic transformers.

Automatic safety shutdown.

Controls Fluorescents and CFLs via dimming ballasts.

"FO" versions power up at the intensity set by the analog voltage.
 
  NOTE: Our “Bright Ideas” booklet contains some unique ideas for wall switch products. It is available upon request and will be available soon as a PDF download file from our web site.
Return to Top